-
-
-
Depending on the model year and body type of attachment may vary.
Front bumper
-open the hood.
-under the hood, Unscrew the screws and take out the clips that secure the grille and the upper bumper section.
-released from the latches and pulls out ahead of the grille.
-wrenched the wheel depending on which side we understand.
-wheel arches, peel the fender liner.
-Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-take out the caps and Unscrew the screws (twisted and inserted from the bottom up) around the perimeter of the bottom.
-with the assistant gently pulls the bumper forward from the rails.
-remove the connectors from the fog (if any).
Rear bumper
-open the boot lid (rear door).
Sedan:
-out of the trunk, behind the panels, Unscrew the nuts that attach the rear lights.
Universal:
-in the opening of the trunk Unscrew two screws on each side that secure the tail lights.
-remove tail lights.
-take out the rear lights on the two pistons on each side.
-perimeter of the lower part and pull out the caps (inserted from the bottom up).
-wheel arches, peel the fender liner.
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-with the assistant gently pulls the bumper from the guides ago.
-snap together the connectors of the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español