How to remove front and rear bumper Subaru Baja

Front bumper

-open the hood.

-under the hood between the headlights pulls out the five rivets that attach the upper part.

-around the bottom part pulls out five caps (inserted from the bottom up).

-wrenched the wheel depending on which side we understand.

-wheel arches, peel the fender liner.

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-with the assistant gently pulls the bumper forward (don't want to break the wires).

-remove the connectors from the equipment (if any).

Rear bumper

Baja Pickup

-remove tail lights.

-open the tailgate.

-take out the clips under the rear lights and opening boot.

-take out the caps (inserted from the bottom up) that secure the lower part.

-in the trunk, Unscrew the screws securing the amplifier bumper to the body.

-with the assistant release the latch in the wings.

-gently pulls the bumper back.

-snap together the connectors of the equipment (if any).

Baja Sedan (Wagon)