Depending on the model year and body type of attachment may vary.

Front bumper

-wrenched the wheel depending on which side we understand.

-wheel arches, peel the fender liner.

-Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-take out the caps and Unscrew the screws (twisted and inserted from the bottom up) around the perimeter of the bottom.

-under the hood, between the headlights, remove the five clips.

-with the assistant gently pulls the bumper forward.

-remove the connectors from the fog (if any).

the scheme of fastening of the front bumper Subaru Legacy (1998-2003)

the scheme of fastening of the front bumper Subaru Legacy (1998-2003)

the scheme of fastening of the front bumper Subaru Legacy (1998-2003)

Rear bumper

-open the boot lid (rear door).

-in the trunk remove the rear valance.

the scheme of fastening of the rear bumper Subaru Legacy (1998-2003)

Sedan:

-Unscrew the nuts that attach the bumper to the amplifier rear panel.

the scheme of fastening of the rear bumper Subaru Legacy (1998-2003)

Universal:

-take out the plugs in the trunk under them and Unscrew the four bolts (spun down).

the scheme of fastening of the rear bumper Subaru Legacy (1998-2003)

the scheme of fastening of the rear bumper Subaru Legacy (1998-2003)

-perimeter of the lower part and pull out the caps (inserted from the bottom up).

-wheel arches, peel the fender liner.

-Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-the scheme of fastening of the rear bumper Subaru Legacy (1998-2003)

with the assistant gently pulls the bumper back.

-snap together the connectors of the equipment (if any).