Depending on the year of manufacture, the mounting points may differ.
-open the hood.
-under the hood, pull out the pistons that attach the upper part.
-remove the turn indicators (they are held on latches).
-from the bottom side, we Unscrew the screws and pull out the pistons that attach the lower part.
-turn the wheels out of the way.
-in the wheel arches, Unscrew the screws and release the slats (front part).
-we take the slats to the side and Unscrew the screws that attach the corners of the bumper to the fenders.
-with an assistant, we pull the bumper forward (look for the wires).
-disconnect the fog light connectors.
-open the trunk lid.
-unscrew the eight screws that secure the top part.
-pull out six pistons that attach the lower part.
-unscrew the two screws behind the license plate.
-in the wheel arches, we Unscrew three screws on each side, which attach the undercarriage.
-unscrew three screws on each side, which attach the sides of the bumper to the fenders.
-release the retainers in the wings.
-with the assistant carefully pull the bumper back (look for the wires).
-disconnect the electrical connectors.