-
-
-
Depending on the year of manufacture, the mounting positions and body type differ.
Front bumper
-open the hood.
-under the hood, pull out the pistons (there may be screws) that attach the upper part.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, we Unscrew the screws that fasten the undercarriage (the front part).
-we take the slats aside and Unscrew one screw on each side (twisted from the bottom up), which attach the corners of the bumper to the fenders.
-from the bottom side, pull out the pistons and Unscrew the screws (screwed and inserted from the bottom up).
-with an assistant, release the corners from the latches in the wings (pull on yourself).
-pull the bumper forward.
-remove the connector from the fog lights (if present).
Rear bumper
-open the trunk lid.
-(sedan) in the trunk opening, we Unscrew the screws that fasten the rear lights.
-in the trunk, we release the side panels.
-behind the panels, we Unscrew the nuts and remove the rear lights.
-under the rear lights, Unscrew the screws and release the latches.
-Unscrew the screws (there may be pistons) in the trunk opening.
-Unscrew the screws and pull out the pistons from the bottom side (twisted and inserted from the bottom up).
-Unscrew the screws in the wheel arches and release the slats.
-(if there is) behind the wings, we Unscrew one screw on each side, which attaches the corners to the wings.
-with an assistant, we release the latches in the wings (we pull the corners on ourselves).
-remove the bumper from the rearward rails.
-remove connectors from electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español