Depending on the modification of the attachment point may differ.
-open the hood.
-under the hood, we pull out four pistons that attach the upper part.
-turn the wheels to the left or right side, depending on which side we will disassemble first.
-in the wheel arches, we Unscrew the screws that fasten the undercarriage (the front part).
-we take the slats aside and Unscrew two screws on each side (twisted from the bottom up), which attach the corners of the bumper to the fenders.
-from the bottom side, we Unscrew four screws (twisted from the bottom up).
-with an assistant, we release the latches under the headlights.
-pull the bumper forward.
-remove the connector from the fog lights.
-open the trunk lid.
-Unscrew the screws on the bottom side (screwed from the bottom up).
-pull out two pistons on each side in the wheel arches and release the undercarriage.
-(if there is) behind the wings, we Unscrew one screw on each side, which attaches the corners to the wings.
-release the latches in the wings (pull the corners on themselves).
-release the latches under the taillights.
-with an assistant, we pull the bumper back.
-remove connectors from electrical equipment.
How to remove the front and rear bumper Pontiac G3
How to remove the front and rear bumper Pontiac G5
How to remove the front and rear bumper Pontiac G6