Front bumper
-open the hood.
-under the hood, Unscrew the four screws, release the clips and remove the grille.
-under the radiator grille and pull out the caps.
-at the bottom, Unscrew the two screws and remove the cover.
-under the pickguard, Unscrew the three screws and take out the two clips that secure the lower and Central part.
-wrenched the wheel to the side.
-wheel arches is released from the latch (pull to yourself) lining of the wings.
-in the wheel wells, Unscrew the screws and nuts, remove the caps and turn down the fender liner.
-for wheel arch liners Unscrew two screws on each side holding the bumper corners to the wings.
-with the assistant gently pulls the bumper forward from the guides (don't want to break the wires and hoses).
-remove the electrical connectors.
-disconnect hose of headlight washers (can leak fluid).
Rear bumper
-open the trunk lid.
-take out the plug, Unscrew two screws on each side and pull themselves rear lights (hold on clips).
-in the corners of the opening of the trunk take out the caps.
-around the bottom part Unscrew the screws (spun from the muffler).
-released from latches arch trims (pull towards you).
-in the wheel wells, Unscrew the screws and remove the caps holding the corners of the bumper and the fender liner.
-we release the latch in the wings (pull the corners themselves).
-with the assistant remove a bumper back (don't want to break the wires).
-remove connectors from electrical equipment.
How to remove front and rear bumper Land Rover Range Rover II (1994-2002)
How to remove front and rear bumper Land Rover Range Rover III (2002-2012)
How to remove front and rear bumper Land Rover Range Rover Sport