How to remove front and rear bumper of Lada (VAZ) Xray

Front bumper

-open the hood.

-under the hood, Unscrew the four screws (spun down) that secure the upper part.

-around the bottom part Unscrew the screws (spun up).

-depending on what direction we will analyze wrenched the wheel to the side.

-wheel arches Unscrew two screws on each side holding the fender liner.

-attach the fender liner to the side and Unscrew one screw on each side (twisted from top to bottom) that attach the angles to the wings.

-we release the latch in the wings (pull the corners themselves).

-pulls the bumper forward (don't want to break the wires).

-remove the connectors from the fog lights (if any).

Rear bumper

-open the trunk lid.

-Unscrew two screws each side that attach the rear lights.

-in the side panels remove the plastic cover (needed to access the rear part of the rear lights).

-through the openings in the casings by hand, Unscrew one screw on each side and remove the tail lights.

-the rear lights take out one piston on each side.

-in the opening of the trunk, Unscrew the two screws and release the seal.

-Unscrew the six screws (spun upwards) around the perimeter of the bottom.

-wheel arches Unscrew the screws that attach the fender liner and mud flaps.

-we release the latch in the wings (pull the corners themselves).

-with the assistant gently pulls the back bumper (don't want to break the wires).

-remove the connectors from the equipment (if any).