-open the hood.
-under the hood, Unscrew the four screws that secure the top.
-around the bottom part Unscrew nine screws (spun up).
-depending on what direction we will analyze wrenched the wheel to the side.
-wheel arches Unscrew two screws on each side holding the fender liner.
-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners to the wings.
-pulls the bumper forward (don't want to break the wires).
-remove the connectors from the fog lights (if any).
-open the tailgate.
-in the opening of the trunk, Unscrew the eight screws.
-Unscrew the five screws (spun upwards) around the perimeter of the bottom.
-wheel arches Unscrew the screws that attach the fender liner.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners to the fenders
-we release the latch in the wings (pull the corners themselves).
-with the assistant gently pulls the back bumper (don't want to break the wires).
-remove the connectors from the equipment (if any).