Screws and nuts are strongly sour, so before removing the need to handle hardware "liquid wrench".

Front bumper

-wrenched the wheel to the side.

-wheel arches Unscrew the screws that attach the fender liner to the bumper.

-move the wing flaps to the side and Unscrew two nuts on each side that attach the angles to the wings.

-in the front part Unscrew the two screws (spun upwards) that secure the amplifier to the body.

-pulls the bumper forward.

the scheme of fastening of the front bumper Lada (VAZ) 2108, 2109

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-in the wheel wells, Unscrew the screws holding the fender liner (if any).

-attach the fender liner to the side and Unscrew two nuts on each side that attach the angles to the wings.

-at the bottom, Unscrew the two screws (spun upwards) that secure the amplifier to the body. If the screws are not loosened, Unscrew the nut.

-gently pulls the bumper back.

the scheme of fastening the rear bumper of Lada (VAZ) 2108, 2109