Screws and nuts are strongly sour, so before removing the need to handle hardware "liquid wrench".
Depending on the year the site of attachment may vary slightly.
-open the hood.
-between the headlights, Unscrew the screws that secure the top.
-around the bottom part Unscrew the screws (spun up).
-depending on which side we will disassemble, wrenched the wheel.
-Unscrew the screws in the wheel arches that secure the fender liner.
-the fender liner, Unscrew the screws that attach the angles to the wings.
-pulls the bumper forward (don't want to break the wires).
-remove the fog lamp connectors (if any).
-Unscrew the screws that attach the lower part (spun up).
-wheel arches Unscrew the screws that attach the fender liner.
-for wheel arch liners Unscrew one screw on each side that attach the angles to the wings.
-open the trunk lid.
-in the opening of the trunk, Unscrew the screws that secure the top.
-with the assistant gently pulls the back bumper (don't want to break the wires).
-remove the connectors from the equipment (if any).