How to remove front and rear bumper Saab 9-7X

Front bumper

-open the hood.

-under the hood, Unscrew the four screws that secure the top.

-from the bottom Unscrew the screws that attach the lower part.

-wrenched the wheel to the side.

-wheel arches Unscrew the screws that attach the fender liner.

-attach the fender liner to the side and Unscrew the screws holding the corners of the bumper to the wings.

-release the fasteners in the wings.

-with the assistant pulls the bumper forward (look for wires and hoses).

-snap together the connectors of the equipment (if any).

-switched the hoses to the headlight washers (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the seven screws that secure the top.

-Unscrew the screws (rivets) from the bottom.

-wheel arches Unscrew three screws on each side holding the fender liner.

-release the fasteners in the wings.

-with the assistant gently pulls the bumper backwards (look for wires).

-snap together the connectors of the equipment (if any).