-
-
-
Depending on the model year and body type of the attachment points are slightly different.
Front bumper
-open the hood.
-under the hood take out the five rivets that attach the upper part.
-release from clamps and remove the side grille of the radiator (behind them are hidden the screws on the headlights).
-release the retaining clips and pull the direction indicator.
-Unscrew three screws on each side and remove the headlights.
-behind the headlights, Unscrew three screws on each side that attach the bumper to the amplifier.
-from the bottom Unscrew the four screws (spun up).
-wrenched the wheel to the side.
-wheel arches Unscrew three screws on each side that secure the wheel arches and corners of the bumper.
-release the fasteners in the wings (pull the corners themselves).
-with the assistant pulls the bumper forward (look for wires and hoses).
-snap together the connectors of the equipment (if any).
-switched the hoses to the headlight washers (if any).
Rear bumper
-open the trunk lid.
-in the trunk of the vacated rear and side trim.
-for casings, Unscrew the four nuts that secure the amplifier bumper to the body.
-wheel arches Unscrew three screws on each side holding the wheel arch liners and side of the bumper.
-we release the latch in the wings (pull the corners themselves).
-with the assistant gently pulls the bumper backwards (look for wires).
-snap together the connectors of the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español