How to remove front and rear bumper Saab 9-3 (2002-2014)

Depending on the model year and body type of attachment may vary slightly.

Front bumper

-open the hood.

-under the hood, Unscrew the four screws and take out the two clips that secure the upper part.

-around the bottom part Unscrew the five screws (spun up).

-wrenched the wheel to the side.

-wheel arches Unscrew three screws on each side, and removed the arch liners (the front part).

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper forward (look for wires).

-snap together the connectors of electrical equipment.

Rear bumper

-open the trunk lid.

-in the trunk, side panels, open stub.

-Unscrew three nuts on each side and remove the tail lights.

-(if any) under the rear lights take out two pistons on each side.

-Unscrew the two nuts and two screws from the bottom.

-in the wheel wells, Unscrew the screws holding the wheel arches and sides of the bumper.

-we release the latch in the wings (pull the corners themselves).

-release the clips under the rear lights (need to pry with a flat head screwdriver).

- with the assistant gently pulls the bumper backwards (look for wires).

-snap together the connectors of the equipment (if any).

How to remove front and rear bumper Saab 9-3 (1998-2003)