How to remove the front and rear bumper of Lancia Ypsilon (2011+)

Lancia (Chrysler) Ypsilon III (846) (2011+)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood, unscrew the screws (spun down) that secure the upper part of the bumper.

-around the bottom of the bumper, unscrew the screws and take out the caps (twisted and inserted from the bottom up).

-turn the wheels to the side.

-in the wheel wells, unscrew two screws on each side that secure the fender liner (front).

-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches at the top of the bumper.

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew two screws on each side and remove the rear lights.

-in the wheel wells, unscrew two screws on each side that secure the fender liner (rear).

-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-from the bottom, unscrew the two screws and take out the two pistons.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches under the rear lights.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).

How to remove the front and rear bumper of Lancia Ypsilon (2003-2011)