How to remove front and rear bumper Lancia Y (840)

Lancia Y 840 (1996-2003)

Front bumper

-open the hood.

-under the hood, unscrew the screws that secure the top of the bumper.

-on the perimeter of the lower part of the bumper, unscrew the screws (spun up).

-turn the wheels to the side.

-in the wheel wells, unscrew three screws on each side that secure the fender liner (front).

-for the fender liner, unscrew two screws on each side that secure the corners of the bumper to the wings.

-unscrew the screws behind the direction indicators.

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-unscrew the four screws in the opening of the trunk.

-in the wheel wells, unscrew three screws on each side that secure the fender liner (rear).

-for the fender liner, unscrew one screw on each side that attach the corners of the bumper to the wings.

-from the bottom, unscrew the four screws (spun up).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).