How to remove the front and rear bumper of Lancia Ypsilon (2003-2011)

Lancia Ypsilon II (843) (2003-2011)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood, unscrew the five screws that secure the top of the bumper.

-on the perimeter of the lower part of the bumper, unscrew the screws (spun up).

-turn the wheels to the side.

-in the wheel wells, unscrew the screws that secure the fender liner (front).

-move the fender liner to the side and unscrew two screws on each side that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors (if any).

front bumper attachment points Lancia Ypsilon II (843) (2003-2011)

Front bumper mounting scheme Lancia Ypsilon II (843) (2003-2011)

 

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-in the opening of the trunk, unscrew the three screws.

-remove the rear lights.

-under the rear lights, unscrew one screw on each side.

-in the wheel wells, unscrew the screws that secure the fender liner (rear).

-move the fender liner to the side and Unscrew two screws on each side that attach the corners of the bumper to the wings.

-from the bottom, unscrew the screws (spun up).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).

rear bumper attachment points Lancia Ypsilon II (843) (2003-2011)

Rear bumper mounting scheme Lancia Ypsilon II (843) (2003-2011)

 

How to remove the front and rear bumper of Lancia Ypsilon (2011+)