How to remove front and rear bumper Lancia Phedra

Lancia Phedra (2002-2010)

Front bumper

-open the hood.

-under the hood, unscrew the screws and take out the caps that secure the grille and the upper part of the bumper.

-we release the fasteners at the bottom of the bumper (you need to rotate 90 degrees).

-turn the wheels to the side.

-in the wheel wells, unscrew the screws that secure the fender liner (front).

-unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the clips in the wings.

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the five screws.

-in the wheel wells, unscrew two screws on each side that secure the fender liner (rear).

-unscrew one screw on each side that secures the sides of the bumper to the wings.

-unscrew the screws from the bottom.

-we release the clips in the wings.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).