How to remove the front and rear bumper Lancia Delta (2008-2014)

Lancia Delta III (2008-2014)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood, unscrew the six screws that secure the top of the bumper and grille.

-from the bottom, unscrew the three screws and take out the four caps (twisted and inserted from the bottom up).

-turn the wheels to the side.

-in the wheel wells, unscrew four screws on each side that secure the fender liner (front).

-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors.

Rear bumper

-open the trunk lid.

-in the wheel wells, unscrew three screws on each side that secure the fender liner (rear).

-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-from the bottom, unscrew the four screws (spun up).

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches in the opening of the trunk (pull the bumper back)

-with an assistant, remove the bumper (look behind the wires).

-disconnect electrical connectors.

How to remove the front and rear bumper Lancia Delta (1993-1999)