How to remove front and rear bumper Jaguar S-Type

Depending on the model year and body type of attachment may vary.

Front bumper

-open the hood.

-under the hood, Unscrew the six screws that secure the top.

-Unscrew one screw on each side (spun down), in the opening between the headlight and the fender (screws tight).

-around the bottom part Unscrew nine screws (spun up).

-wrenched the wheel to the side.

-wheel arches Unscrew three screws on each side and removed the wheel arches (the front part).

-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.

-if you have headlamp washers, remove the nozzle and remove the cap.

-with the assistant pulls the bumper forward (look for wires).

-release the electrical connectors.

Rear bumper

-open the trunk lid.

-in the trunk, Unscrew the screws, and remove the back and side plating.

-behind the rear casing, through holes (need knob), Unscrew the four screws.

-the side casings, in the inner part of the wings, Unscrew three screws on each side (remove, if necessary, additional equipment).

-Unscrew the screws around the perimeter of the bottom.

-in the wheel wells, Unscrew the screws and peel the fender liner (rear part).

-the fender liner, Unscrew the screws that attach the sides to the wings.

-with the assistant pulls the bumper backwards (look for wires).

-snap together the connectors of electrical equipment.

How to remove front and rear bumper Jaguar F-Type

How to remove front and rear bumper Jaguar X-Type