-
-
-
Depending on the year of release of the attachment can vary.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws (spun down) that secure the upper part.
-Unscrew the four screws (spun upwards) that secure the lower part of the bumper.
-wrenched the wheel to the side.
-wheel arches Unscrew three screws and one from the bottom that attach the fender liner (remove unnecessary).
-move the wing flaps to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners themselves).
-with the assistant pulls the bumper forward (don't want to break the wires).
-snap together the connectors of the fog lights.
Rear bumper
-open the trunk lid.
-in the opening of the trunk, near the rear lights, Unscrew the two screws.
-Unscrew the six screws (spun up) that secure the lower part.
-wheel arches Unscrew three screws on each side holding the fender liner to the bumper (easier to Unscrew the ratchet with a nozzle).
-Unscrew one screw on each side (spun upwards) holding the corners to the wings.
-we release the latch in the wings (pull the corners themselves).
-with the assistant pulls the back bumper (don't want to break the wires).
-disconnect the connectors from the license plate lighting and parking sensors (if any).