How to remove front and rear bumper Alfa Romeo Giulietta

Front bumper

-open the hood.

=under the hood, Unscrew the four screws (spun down) that secure the upper part.

-Unscrew the seven screws around the perimeter of the bottom (spun up).

-wrenched the wheel to the side.

-wheel arches Unscrew four screws on each side holding the fender liner.

-Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper forward (don't want to break the wires and hoses).

-snap together the connectors of the fog lights.

-switched the hoses to the headlight washers (if any).

Rear bumper

-open the trunk lid.

-remove tail lights.

-Unscrew the four screws (spun up) that secure the lower part.

-wheel arches Unscrew three screws on each side holding the fender liner.

-Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-we release the latch in the wings, behind the rear lights and opening boot.

-with the assistant pulls the back bumper (don't want to break the wires).

-breakaway connectors from the light plate and parking sensors (if any).