How to remove front and rear bumper Scion xA

Front bumper

-open the hood.

-under the hood, take out four pistons and remove the radiator grill.

-under the radiator grill, take out three pistons.

-from the bottom side, unscrew the eight screws (screwed from bottom to top).

-wheel the wheels to the side.

-in the wheel arches, take out the caps and release the wheel arch liners (front part).

-behind the wheel arch liners, Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.

-release the latches in the wings (pull the corners of the bumper towards you).

-with an assistant, we pull the bumper forward (we look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the two screws.

-from the side of the bottom, take out four pistons.

-in the wheel arches, take out the rivets that secure the wheel arch liners (rear part) and unscrew the screws that secure the corners of the bumper to the fenders.

-release the latches in the wings (pull the corners of the bumper towards you).

-release the latches in the trunk opening.

-with an assistant, we pull the bumper back (look behind the wires).

-we disconnect the connectors of the electrical equipment.