How to remove front and rear bumper Scion FR-S (Toyota 86)

Front bumper

-open the hood.

-under the hood, take out two pistons and unscrew the five screws that secure the upper part of the bumper.

-from the bottom, take out seven caps and unscrew two screws.

-wheel the wheels to the side.

-in the wheel arches, take out four pistons on each side that secure the wheel arch liners (front part).

-remove the connectors from the direction indicators repeaters (if any).

-Unscrew one screw on each side that secure the corners of the bumper to the fenders.

-release the latches in the wings (pull the corners of the bumper towards you).

-release the latches under the headlights.

-with the assistant, we pull the bumper forward (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

Rear bumper

-open the trunk lid.

-take out the three pistons, release the clips and remove the rear panel trim.

-release the side trims of the trunk.

-for the skins, Unscrew the nuts and remove the taillights.

-in the opening of the trunk, Unscrew the two screws.

-take out eight caps from the side of the bottom.

-in the wheel arches, Unscrew the screws that secure the wheel arch liners and the sides of the bumper.

-release the latches in the wings (pull the corners of the bumper towards you).

-release the latches under the rear lights and in the trunk opening.

-with an assistant, we pull the bumper back (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).