The attachment points may differ depending on the year of manufacture.
Front bumper
-open the hood.
- (if any) we take out six caps under the hood and remove the lining.
-under the hood, take out the five rivets that secure the upper part of the bumper.
-from the bottom side, unscrew the eight screws (screwed from bottom to top).
-wheel the wheels to the side.
-in the wheel arches, Unscrew the screws that secure the wheel arch liners (front part).
-behind the wheel arch liners, Unscrew one screw on each side that secure the corners to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-release the latches under the headlights.
-with an assistant, we pull the bumper forward (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the two screws.
-from the side of the bottom, take out four pistons.
-in the wheel arches, Unscrew the screws that secure the wheel arch liners (rear part).
-Unscrew the screws that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-release the latches under the rear lights and in the trunk opening.
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).