Depending on the year of release of the attachment can vary.

Front bumper

-open the hood.

-take out one piston on each side and remove the turn signal (lift up and pull towards you).

-the turn indicators Unscrew one screw on each side.

-take out the two clips that secure the upper part.

-from the bottom take out the rivets that attach the lower part.

-wrenched the wheel to the side.

-wheel arches pulled three pistons (screws) on each side holding the fender liner (front part).

-move the wing flaps to the side and Unscrew one screw on each side (twisted upside down) holding the corners of the bumper to the wings.

-release the fasteners in the wings (pulls the corners of the bumper down and yourself).

-with the assistant pulls the bumper (look for wires).

-snap together the connectors of the equipment (if any).

the attachment of the front bumper Saturn Vue (2002-2007)

The scheme of fastening of the front bumper Saturn Vue (2002-2007)

 

 

Rear bumper

-open the trunk lid.

-in the opening of the trunk pulls out the six rivets that attach the upper part.

-take out four clips from the bottom.

-wheel arches pulled three pistons on each side that attach the fender liner.

-release the fasteners in the wings.

-with the assistant gently pulls the bumper (look for wires).

-snap together the connectors of the equipment (if any).

the attachment of the rear bumper Saturn Vue (2002-2007)

Diagram of rear bumper Saturn Vue (2002-2007)