How to remove front and rear bumper Saturn S-Series

Depending on the year of release of the attachment can vary.

Front bumper

-open the hood.

-under the hood, take out the three clips that secure the upper part.

-from the bottom Unscrew the screws and take out the rivets that attach the lower part.

-wrenched the wheel to the side.

-wheel arches pulled three pistons (screws) on each side holding the fender liner (front part).

-release the fasteners in the wings, sliding over the corners of the bumper forward.

-with the assistant pulls the bumper (look for wires).

-snap together the connectors of the equipment (if any).

Rear bumper

-open the trunk lid.

-(if you have one) remove the cover of the bumper.

-in the opening of the trunk, take out the clips that secure the upper part.

-take out the caps from the bottoms.

-wheel arches pulled three pistons on each side that attach the fender liner.

-release the fasteners in the wings, pull the edge of bumper ago.

-with the assistant gently pulls the bumper (look for wires).

-snap together the connectors of the equipment (if any).