How to remove front and rear bumper Saturn Ion

Depending on the year the site of attachment may vary slightly.

Front bumper

-open the hood.

-under the hood, take out the four clips that secure the upper part.

-from the bottom Unscrew the screws and take out the rivets that attach the lower part.

-wrenched the wheel to the side.

-wheel arches take out the rivets that attach the fender liner (front part).

-Unscrew one screw on each side holding the bumper corners to the wings.

-we release the latch in the wings (pull the corners themselves).

-with the assistant pulls the bumper forward (look for wires and hoses).

-snap together the connectors of the equipment (if any).

-switched the hoses to the headlight washers (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk pulls out four clips.

-Unscrew the four screws from the bottom.

-in the wheel wells, Unscrew the screws holding the wheel arches and corners of the bumper.

-we release the latch in the wings (pull the corners themselves).

-with the assistant gently pulls the bumper backwards (look for wires).

-snap together the connectors of the equipment (if any).