Depending on the year of manufacture, the mounting points may differ.
-open the hood.
-under the hood, we Unscrew two screws and pull out four pistons that attach the top part.
-in the wheel arches, we Unscrew three screws on each side, which attach the undercarriage and bumper sides.
-Unscrew the screws and pull out the pistons along the perimeter of the lower part (twisted and inserted from the bottom up).
-release the latches in the wings (pull the corners on themselves).
-with an assistant, we pull the bumper forward (look for the wires).
-disconnect the connectors from the fog lights and turn indicators.
-open the trunk lid.
-Unscrew the screws in the trunk opening that fasten the upper part.
-from the bottom side, we Unscrew the screws (screwed from the bottom up) that fasten the lower part.
-in the wheel arches, we Unscrew four screws on each side, which attach the undercarriage and bumper sides.
-release the latches in the fenders (pull the corners on themselves) and pull the bumper back (look for the wires).
-disconnect the Parking meter connectors (if present).