How to remove front and rear bumper Isuzu Ascender

Isuzu Ascender (2002-2008)

Front bumper

-open the hood.

-under the hood, unscrew the four screws and remove the grille (held by latches).

-under the grille, unscrew the three screws (spun down).

-take out the caps in the bumper grille (inserted from the bottom up)

-unscrew the screws (caps) in the wheel arches.

-with an assistant, release from the latches and pull the bumper forward from the guides in the wings (look for the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the seven screws.

-unscrew the screws in the wheel arches.

-from the bottom take out the caps (inserted from the bottom up).

-with an assistant, pull the bumper back from the guides in the wings (look for the wires).

-disconnect electrical connectors.