How to remove front and rear bumper GMC Terrain

Depending on the year of manufacture, the mounting points may differ.

Front bumper

-open the hood.

-(if available) pull out the pistons and remove the pads above the radiator grille.

-Unscrew the screws (screwed from top to bottom) that fasten the radiator grille and the top part.

-Unscrew the four screws at the bottom (screwed from the bottom up).

-turn the wheels out of the way.

-in the wheel arches, we pull out three pistons and Unscrew one screw each, which attaches the undercarriage and bumper corners.

-remove the connectors from the fog lights.

-release the latches in the fenders (pull the corners on themselves) and under the headlights (if the latches do not give in, you need to press a flat screwdriver on the tabs between the wing and the bumper).

-with an assistant, we pull the bumper forward.

Rear bumper

-open the trunk lid.

-in the opening of the trunk, we pull out the caps and Unscrew four screws.

-in the lower part, we Unscrew two screws and pull out two pistons (twisted and inserted from the bottom up).

-in the wheel arches, we Unscrew one screw and pull out three pistons that attach the undercarriage.

-behind the slats, we Unscrew one screw on each side (twisted from the bottom up), which attach the corners of the bumper to the wings.

-release the latches in the wings (pull the corners on themselves) (if the latches do not give in, you need to press a flat screwdriver on the tabs between the wing and the bumper).

-with an assistant, we pull the bumper back (look for the wires).

-disconnect the electrical equipment connectors (if any).