Depending on the year of manufacture, the mounting points may differ slightly.
-open the hood.
-release the top from the latches with a flat screwdriver, release the bottom from the latches and remove the radiator grille.
-under the grill, we Unscrew two screws and pull out the pistol.
-turn the wheels out of the way.
-in the wheel wells, Unscrew the screws holding the fender liner (front part) and the sides of the bumper.
-pull the pistons out from the bottom side.
-release the retainers in the wings.
-with an assistant, we pull the bumper forward.
-remove the connectors of the turn indicators and fog lights.
-open the trunk lid.
-in the opening of the trunk, we Unscrew seven screws.
-in the wheel arches, we Unscrew the screws that fasten the undercarriage and bumper sides.
-from the bottom side, we pull out four pistons.
-with the assistant carefully pull the bumper back (look for the wires).
-disconnect the electrical equipment connectors (if any).